Canon 1100D, 5157B002, 5161B039 manual 155

Handy Features

3Setting the Auto Power-off Time

To save battery power, the camera turns off automatically after the set time of idle operation elapses. You can set this auto power-off time. When the camera has turned off due to auto power off, you can wake it up by pressing the shutter button halfway or pressing any of the following buttons: <M>, <x>, <A>, etc.

If [Off] has been set, either turn off the camera yourself or press the <B> button to turn off the LCD monitor to save battery power.

Even if [Off] has been set and the camera is not used for 30 min., the LCD monitor will turn off automatically. To turn on the LCD monitor again, press the <B> button.

Under the [5] tab, select [Auto power off], then press <0>. Select the desired setting, then press <0>.

3Adjusting the LCD Monitor Brightness

You can adjust the brightness of the LCD monitor to make it easier to read.

Under the [6] tab, select [LCD brightness], then press <0>. With the adjustment screen displayed, press the <U> key to adjust the brightness, then press <0>.

When checking the exposure of an image, set the LCD monitor brightness to 4 and prevent the ambient light from affecting the reviewed image.

155