Playback on a
X The image will appear on the TV screen (Nothing will be displayed on the camera’s LCD monitor).
The images will automatically be displayed at the TV’s optimum resolution.
By pressing the <B> button, you can change the display format.
To playback movies, see page 186.
Do not connect any other device’s output to the camera’s <D> terminal. Doing so may cause a malfunction.
Certain TVs might not be able to playback the captured images.
Using HDMI CEC TV Sets
If the TV set connected to the camera with an HDMI cable is compatible with HDMI CEC*, you can use the TV set’s remote control for playback operations.
*An
1 Set [Ctrl over HDMI] to [Enable].
Under the [4] tab, select [Ctrl over HDMI], then press <0>.
Select [Enable], then press <0>.
2Connect the camera to a TV set.
Use an HDMI cable to connect the
camera to the TV.
XThe TV’s input will switch automatically to the HDMI port connected to the camera.
192