EverFocus EDSR-900 instruction manual Matrix Setting Menu, Dialog, CH, DWELL, Event, Call Monitor

MENU

6.13 MATRIX SETTING MENU

MATRIX SETTING MENU

CALL MONITOR

MONITOR-1

MONITOR-2

MONITOR-3

MONITOR-4

(Dialog 1)

ENTER

MONITOR-0 SETTING MENU

CH	DWELL	EVENT
00	07 SECS	NONE
00	07 SECS	NONE
00	07 SECS	NONE
00	07 SECS	NONE
00	07 SECS	NONE
00	07 SECS	NONE
00	07 SECS	NONE
00	07 SECS	NONE
00	07 SECS	NONE

(Dialog 2)

In the MATRIX SETTING MENU, we define the standard sequences for each matrix monitor and event, which override these sequences.

Users may set up to 5 call monitors accordingly (Dialog 1).

Note: CALL MONITOR is the regular CALL MONITOR. MONITOR-1~4 are additional 4 call monitors for video matrix functions.

Select the desired call monitor and then press ENTER key. The SUB-MENU will show as Dialog 2.

CH, DWELL, EVENT:

(1)CH (Channel): Select the camera to be shown in the standard sequence of this call monitor. With setting “00”the channel will be skipped in the sequence.

(2)DWELL (Dwelling time): Set 0~99 seconds for the dwelling time of each camera.

(3)EVENT: Set the alarm and correspondent motion to the camera.

NONE: no alarm or motion action is assigned to this camera.

MOTION: If MOTION detection is active for this camera, the camera will be displayed, if motion is detected. After alarm record duration the monitor switches back to standard sequence or spot camera (depending on operation).

A01 ~ A09: The camera will be displayed, if selected alarm input is active.

Turn the JOG dial clockwise or counter-clockwise to select the options.

Press ENTER key to confirm the option and move to next column.

ENTER

Press MENU key to return to Main Menu, press again to leave Set up Menu.

MENU

24