If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
1.Follow the directions in Wireless - Automatic through Step 5.
2.The player searches for a network, and then displays the connection failed message.
3.On the bottom of the screen, select
IP Settings, and then press the v button.
The IP Settings screen appears.
4.Select the IP Setting field, and then press the v button.
5.Select Enter manually in the IP Setting field, and then press the v button.
6.Select a value to enter (IP Address, for
example), and then press v button. Use the number keypad on your remote control to enter the numbers for the value. Use the ◀▶ buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the v button.
7.Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 6.
8.Repeat Steps 6 and 7 until you have filled in all values.
✎✎ NOTES
■■You can get the Network values from your Internet provider.
9.When finished, and then press the RETURN or EXIT button. The Security Screen appears.
10.On the Security screen, enter your network's Security Code or Pass Phrase. Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with the ▲▼◀▶ buttons, and then pressing the v button.
11.When finished, select Done at the right
of the screen, and then press the v button.
The player verifies the network connection and then connects to the network.
12.After the player verifies the network,
select OK, and then press the v button.
ĞĞWPS(PBC)1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Network Settings, and then press the v button.
4.Select Wireless in the Network Settings screen, and then press the v button.
5.Press the ▲▼ button on your remote, and then press the ◀▶ button to select the WPS(PBC).
6.Press the v button on your remote. The "Press the PBC button" message appears.
7.Press the WPS(PBC) button on your router within two minutes. Your player automatically acquires all the network settings values it needs and connects to your network.
The Network Status screen appears. The player connects to the network after the network connection is verified.
Before you begin, open the router's setup menu on your PC and access the screen with the WPS PIN entry field.
1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Network Settings, and then press the v button.
4.Select Wireless in the Network Settings
screen, and then press the v button. The player searches for and then displays a list of the available networks.
5.Select the desired network, and then press the ▶ button.
6.Select the WPS(PIN), and then press the
v button. The PIN
7.Enter the PIN into the WPS PIN entry field in the router's Set Up screen and then save the the screen.
✎✎ NOTES
■■Contact the manufacturer of the router for instructions explaining how to access the route's Set Up screens or refer to the router's user's manual.
■■For WPS connection, set your wireless router’s security encryption to AES. Setting to WEP security encryption does not support WPS connection.
Network Test
Use this menu item to check whether your network connection is working or not.
Network Status
Use to check whether a connection to a network and the Internet has been established.
Wi-Fi Direct
The
✎✎ NOTES
■■Some
■■Bluetooth transmissions can interfere with the
1.Turn on the
2.In the Home screen, select Settings, and then press the v button.
3.Select Network, and then press the v button.
4.Select
v button.
The
14