Network Settings
To begin setting up the network connection for your player, follow these steps:
1.In the Home menu, press the ▲▼◀▶ buttons to select Settings, and then press the v button.
2.Press the ▲▼ buttons to select
Network, and then press the v button.
3.Press the ▲▼ buttons to select Network Settings, and then press the v button.
4.Press the ▲▼ buttons to select
Network Type, and then press the v button.
5.Press the ▲▼ buttons to select Wired
or Wireless, and then press the v button.
6.Go to the next section.
Configuring Your Network Connection
Before you begin, contact your ISP to find out if your IP address is static or dynamic. If it is dynamic, and you have a wired or wireless network, we recommend using the Automatic configuration procedures described below.
If you are connecting to a wired network, connect the player to your router using a LAN cable before you start the configuration procedure.
If you are connecting to a wireless network, disconnect any wired network connection before you begin.
To begin configuring your network connection, follow these steps:
Wired Network
ĞĞWired - Automatic
1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Network Settings, and then press the v button.
4.Select Wired in the Network Settings screen, and then press the v button.
5.Select Connect button, and then press
the v button. The product detects the wired connection, verifies the network connection and then connects to the network.
ĞĞWired - Manual
If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.
Follow Steps 1 and 2 in Wired - Automatic, and then follow these steps:
1.Select Network Status. The player searches for a network, and then displays the connection failed message.
2.On the bottom of the screen, select
IP Settings, and then press the v button.
The IP Settings screen appears.
3.Select the IP Setting field, and then press the v button.
4.Select Enter manually in the IP Setting field, and then press the v button.
5.Select a value to enter (IP Address,
for example), and then press the v button.
Use the number keypad on your remote control to enter the numbers for the value. Use the ◀▶ buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the v button.
6.Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 5.
7.Repeat Steps 5 and 6 until you have filled in all values.
✎✎ NOTES
■■You can get the Network values from your Internet provider.
8.When finished entering all the values, and then press the RETURN or EXIT buttons. The player verifies the network connection and then connects to the network.
Wireless Network
You can setup a wireless network connection in four ways:
When you configure the wireless network connection, any wireless network devices currently connected through the player or, if applicable, the player's current wired connection, will be disconnected.
ĞĞWireless - Automatic
1.In the Home screen, select Settings, and then press the v button.
2.Select Network, and then press the v button.
3.Select Network Settings, and then press the v button.
4.Select Wireless in the Network Settings
screen, and then press the v button. The player searches for and then displays a list of the available networks.
Network Settings
Select your network type. |
|
Network Type | Wireless |
Wireless network |
|
Add Network | You can connect your |
| player to the internet. Please |
| select which wireless network |
| to use. |
WPS(PBC) Search
m Move " Select ' Return
5.Select the desired network, and then press the v button.
6.On the Security screen, enter your network's Security Code or Pass Phrase.
Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with an arrow button, and then pressing v button.
7.When done, select Done and then
press the v button. The player verifies the network connection and then connects to the network.
8.When verification is complete, select OK, and then press the v button.
✎✎ NOTES
■■You should be able to find the Security Code or Pass Phrase on one of the set up screens you used to set up your router or modem.
13