Samsung BD-H5900/XU, BD-H5900/EN Connections, Connecting to a TV, Connecting to an Audio System

Connections

Connecting to a TV

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

-- Do not connect the power cord to the wall outlet until you have made all the other connections.

-- When you change the connections, turn off all devices before you start.

Audio

Video

Connecting to an Audio System

You can connect the Blu-ray player to an audio system using one of the methods illustrated below.

-- Do not connect the power cord to the wall outlet until you have made all the other connections.

-- When you change the connections, turn off all devices before you start.

Method 1 Connecting to an HDMI supported AV receiver

●●Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your receiver.

●●Best quality (Recommended)

Method 2 Connecting to an AV receiver with Dolby Digital or a DTS decoder

●●Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the product to the Digital Coaxial In jack of the receiver.

●●Good quality

●●You will hear sound only through the front two speakers with Digital Output set to PCM.

✎✎ NOTES

■■If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio Out on the player to an audio system to hear audio.

■■An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.

■■Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of your TV.

■■When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.

■■A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Colour to Off in the menu.

■■To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed HDMI cable.

■■HDMI outputs only a pure digital signal to the TV.

If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

Method 1

Audio

Method 2

Audio

8