Samsung BD-P1400 BD-P1400/EUR, BD-P1400/XEC CONNECTING TO AN AUDIO SYSTEM (DOLBY DIGITAL, DTS AMPLIFIER), connections

connections

CONNECTING TO AN AUDIO SYSTEM (DOLBY DIGITAL, DTS AMPLIFIER)

1.If using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the Blu-ray Disc Player to the DIGITAL AUDIO IN (OPTICAL) terminal of your Amplifier.

If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the Blu-ray Disc Player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.

2.Using the video signal cable(s), connect the HDMI , COMPONENT, S-VIDEO, or VIDEO OUT terminals on the rear of the Blu-ray Disc Player to the HDMI, COMPONENT, S-VIDEO, or VIDEO IN terminals of your TV as described on pages 20 to 25.

3.Turn on the Blu-ray Disc Player, TV, and Amplifier.

4.Press the input select button of the Amplifier to select the external input in order to hear sound from the Blu-ray Disc Player. Refer to your Amplifier's user manual to set the Amplifier's audio input.

OR

M Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

Please set the audio in the menu screen according to the Amplifier. (See pages 35~36)

The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your Amplifier.

When using this connection, Blu-ray Discs with an LPCM audio soundtrack will only be heard over the front two channels.

28_ connections