Connecting the hose
•Connect the appliance to the water mains using the hose provided. Do not reuse the old hoses.
Water supply hose
1.Turn off the water supply.
2. Fasten the aqua stop to the inlet connector tightly.
3.Turn on the water supply.
Drain hose
1.If you use only the drain hose for drainage, place and install it below 80 cm from the ground.
If the drain hose is installed higher than 80 cm, dirty water | Below 80 cm | |
WARNING may flow back or a significant amount of dirty water may | ||
| ||
remain inside the dishwasher. |
|
2.If you are sharing one drain pipe for the draining both the dishwasher and the sink, connect the drain hose of the dishwasher to the
Do not install the
a significant amount of dirty water remaining inside the dishwasher.
Y-adapter
saddle |
|
clamp | Below 80 |
| |
| cm |
setting up your dishwasher _11
|
| ||
|
| ||
|
|
|
|