troubleshooting
Check these points if your dishwasher…
PROBLEM | POSSIBLE CAUSE | SOLUTION |
|
|
|
Will not start. | The door is not closed completely. | Check that the door is latched and |
| The Start/Reset button is not | closed completely. |
| selected. | Press the Start/Reset button before |
|
| closing the door. |
|
|
|
| No program is selected. | Select a program. |
|
|
|
| The power cord is not connected. | Connect the power cord. |
|
|
|
| The water supply does not work. | Check that the water supply valve is |
|
| open. |
|
|
|
Has a bad odour. | There is water left over from the last | Insert detergent without loading |
| cycle. | dishes, and run the Normal cycle to |
|
| clean the dishwasher. |
|
|
|
Has water remaining | The drain hose is folded or clogged. | Straighten the hose. |
after the program has |
|
|
finished. |
|
|
|
|
|
Has food particles | An inappropriate program has been | Select a program according to the |
remaining on dishes. | selected. | number and soil level of the dishes, |
|
| as directed in this manual. |
|
|
|
| The filter is contaminated. | Clean the filter. |
|
|
|
| No dishwashing detergent is being | Use a automatic dishwasher |
| used. | detergent. |
|
|
|
| The pressure of the supplied water | The proper pressure of the supplied |
| is low. | water should be 0.05 ~ 0.8 Mpa. |
|
|
|
| One of the nozzles is clogged. | Clean the nozzle. |
|
|
|
| The dishes are improperly loaded. | Rearrange the dishes so they do not |
|
| interfere with the spray arm and the |
|
| dispenser operation. |
|
|
|
Does not dry dishes well. | There is no rinse aid in the dispenser. | Check the dispenser and add rinse |
|
| aid. |
|
|
|
26_ troubleshooting
|
| ||
|
| ||
|
|
|
|