connections
Connection to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier)1
If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.
2
Using the video signal cable(s), connect the VIDEO, COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, COMPONENT or DVI IN terminals of your TV as described on pages 8 to 11.
3
Turn on the DVD player, TV, and Amplifier.
Coaxial Cable
Dolby Digital or
DTS amp
4
Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.
Note
-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers or to your hearing.
-Please set the audio in the menu screen according to the Amplifier. (See pages 28 to 29)
-The position of terminals can vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.
14_ connections