Playing a Disc
Before Play
-Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV remote control.
-If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select
a language, Press the π/† buttons, and then press the ENTER button. (This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use.
Once you select a menu language, you can change it by pressing the (
Select Menu Language
English
Français
Deutsch
Español
Italiano
Nederlands
Playback
1.Press the OPEN/CLOSE (
2.Place a disc gently into the tray with the disc’s label fac- ing up.
3.Press the PLAY (
4.Stopping Play
Press the STOP (
5.Removing Disc
Press the OPEN/CLOSE (
6.Pausing Play
Press the PAUSE (
-Screen stops, no sound.
To resume, press the PLAY (
7.Slow Motion Play
Press the SEARCH (
-No sound is heard during slow mode.
-Press the PLAY(
8.Step Motion Play (Except CD)
Press the SKIP (
-Each time the button is pressed, a new frame will appear.
-No sound is heard during STEP mode.
-Press the PLAY (
-You can only perform step motion play in the forward direction.
Note
-If the player is left in the stop mode for more than one minute without any user interaction, a screen saver will be activated. Press the PLAY (
-If the player is left in the stop mode for more than about 30 minutes, the power will automatically shut off.(Automatic
-If the player is left for about 5 minutes in pause mode, it will stop.
-This (
English _15