Samsung DVD-HD850 DVD-HD850/AFR, DVD-HD850/AND, DVD-HD850/UMG, DVD-HD850/XSG Setup, Note, ENG-9, Use the, SE T U P, Rear Panel, 6.HDMI OUT JACK, 4.VIDEO OUT JACK, If HDMI/COMPONENT, 3.AUDIO OUT JACKS, COMPOSITE/S-VIDEO

SE T U P

Rear Panel

12

Setup

1 3 4 5 6

1.DIGITAL AUDIO OUT JACKS

-Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.

-Use either an optical or coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

2.COMPONENT VIDEO OUT JACKS

-Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video.

-If HDMI/COMPONENT (P-SCAN) Video Output is selected in Setup Menu, progressive scan mode will work.

-If COMPONENT(I-SCAN) Video Output is selected in Setup Menu, interlaced scan mode will work.

3.AUDIO OUT JACKSConnect to the Audio input jacks of your television or audio/video receiver

4.VIDEO OUT JACK-Use a video cable to connect to the Video input jack on your television.-The Video Output in Setup Menu must be set toCOMPOSITE/S-VIDEO.5.S-VIDEO OUT JACK

-Use the S-Video cable to connect this jack to the S-Video jack on your television for higher picture quality.

-The Video Output in Setup Menu must be set to

COMPOSITE/S-VIDEO.

6.HDMI OUT JACK

-Use the HDMI cable to connect this jack to the HDMI jack on your television for the best quality picture.

-If an HDMI cable is connected to an HDMI-compatible TV, HDMI will be output automatically within 10 seconds.

-If you want to use a Video, S-Video or Component Output, unplug HDMI cable.

Note

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-If HDMI/COMPONENT (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do not work.

-The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.

-There may be no image output if the DVD player is connected to a TV or display that is not compatible with the above format.

-Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.

-See pages 51 ~ 53 to get more information on how to use the setup menu.

ENG-9