Samsung DVD-HD850 DVD-HD850/AFR, DVD-HD850/AND, DVD-HD850/UMG, DVD-HD850/XSG Note, screen, ENG-13, VIDEO SEL, CO N N E C T I O N S, AUDIO (red and white) IN, AUDIO (red and white) OUT, Output mode. (See page 11)

CO N N E C T I O N S

Connection to a TV (Interlace)-Connecting to your TV using Component video cables.

-You will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

Connections

1

Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONENT IN terminals of your TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV.

Turn on the DVD player and TV.

3

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV

RED BLUE GREEN

REDWHITE

Audio Cable

screen.

RED WHITE

Component cable

(not included)

RED BLUE GREEN

4

Set the Video Output to COMPONENT(I-SCAN)in the Display

Setup menu. (See pages 51 to 53)

You can use the VIDEO SEL. button to change the Video

Output mode. (See page 11)

Note

-If Video output is incorrectly set to S-Video with the Component cables connected, the screen will turn red.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)

-The component terminal of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y” depending on the manufacturer. The number and position of terminals may vary depending on the TV set. Please refer to the user's manual of your TV.

ENG-13