CO N N E C T I O N S

Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

1

If using an optical cable (not included), connect the DIGITAL AUDIO OUT (OPTICAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier. If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.

2

Using the video signal cable(s), connect the VIDEO, S-VIDEO,COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO,COMPONENT or DVI IN terminal of your TV as described on pages 11 to 15.

3

Turn on the DVD player, TV, and Amplifier.

or

Coaxial Cable

 

(not included)

Optical Cable (not included)

Dolby digital or

DTS amp

4

Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

Note

-When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in Audio Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.

-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

-Please set the audio in the menu screen according to the Amplifier. (See pages 49 to 50)

-The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

-Please remove the dust coveplug from the Optical Audio Out jack before using the optical cable (not included) and replace the cover when it's not used.

ENG-18