Using Auto Backup to send photos or videos
You can send photos or videos that you captured with the camera to a PC wirelessly.
Installing the program for Auto Backup on your PC
1Install•The Auto Backup program is installed on the PC and the information about the PC will be stored to the camera. Follow the
•You can also save the information about the PC to the camera by connecting the PC and the camera via
Before installing the program, ensure that the PC is connected to a network.
Sending photos or videos to a PC
1Rotate the mode dial to w.
2Select
•If the
•You must configure the backup PC information to use the Auto Backup feature. For more details, refer to “Installing the program for Auto Backup on your PC”. (p. 120) If the Auto Backup program is installed on your PC, save the PC information via USB cable or
•The camera will automatically attempt to connect to a WLAN via the most recently connected AP device.
•If the camera has not previously been connected to a WLAN, it will search for available AP devices. (p. 112)
Wireless network 120