Samsung GT-I9210 ››Receive data using the Bluetooth wireless feature, Wi-Fi, Accept, Visible, Settings, time-out, Bluetooth

››Receive data using the Bluetooth wireless feature

1 In Idle mode, open the application list and select Settings

→Bluetooth, and then select the check box next to your device.

To select the length of time that your device will be visible, press [] → Visible time-out.

2

3

When prompted, enter the PIN for the Bluetooth wireless feature and select OK. Alternatively, select Accept to match the PIN between your device and the device.

Select Accept to confirm that you are willing to receive data from the device.

Received data is saved to the bluetooth folder. If you receive a contact, it is automatically saved to the phonebook.

Wi-Fi

Learn to use your device’s wireless networking capabilities to activate and connect to any wireless local area network (WLAN) compatible with the IEEE 802.11 b/g/n standards.

You can connect to the internet or other network devices anywhere an access point or wireless hotspot is available.

Your device uses a non-harmonised frequency and is intended for use in all European countries. The WLAN can be operated in the EU without restriction indoors, but cannot be operated outdoors.

Connectivity

97