Samsung GT-N7000 ››Add a Wi-FiAP manually, ››Set the static IP settings, ››Connect to a Wi-FiAP with a protected setup, Add, Save, Wi-Fi, Wi-Fi, Wi-Fi, Wi-Fi, Static, network

››Add a Wi-Fi AP manually

1

2

3

In the application list, select Settings →Wi-Fi→ Add Wi-Fi network.

Enter an SSID for the AP and select a security type.

Set the security settings according to the security type you selected, and then select Save.

››Connect to a Wi-Fi AP with a protected setup

You can connect to a secured AP with a WPS button or WPS PIN. To use this method, your wireless access point must have a WPS button.

Connect with a WPS button

1

2

3

In the application list, select Settings →Wi-Fi.

Press [] →WPS push button.

Press the WPS button on the AP within 2 minutes.

Connect with a WPS PIN

1

2

3

In the application list, select Settings →Wi-Fi.

Press [] →WPS PIN entry.

On the AP, enter the PIN of your device.

››Set the static IP settings

1 In the application list, select Settings →Wi-Fi. 2 Select an AP →Show advanced options.

3 Select the IP settings drop-down menu.

4 Select Static.

Connectivity

147