Basic Functions
Use iPod/iPhone with a Wireless Dock
Cradle for iPod/iPhone
You can enjoy finer quality of music through the speaker by sending iPod/iPhone’s audio signal using a Wireless Transmitter.
The Wireless Transmitter's linking ID is preset at the factory and the main unit and Wireless Transmitter should link (connect wirelessly) automatically when main unit is turned on. If the link indicator does not light when main unit and Wireless Transmitter are turned on, ID setting must be made manually. (See page 63)
Turn on the main unit and connect the iPod/ iPhone to the Wireless transmitter.
Then press the FUNC. button on the product to select "iPod" mode.
The FUNC. mode of the main unit will switches as follows. Repeatedly press BD/DVD D.IN AUX iPod HDMI 1 HDMI 2 TUNER (See page 14)
How to charge the Wireless Transmitter
LINK | STANDBY |
STANDBY | |
CHARGE |
|
| CHARGE |
1.Connect the Wireless Transmitter to the Charging Cradle.
2.Connect the DC power adaptor to a wall socket.
•The charging indicator lights up and charging starts. After the battery is fully charged, the charging indicator turns Green.
Operation status of the charging cradle's LED
DisplayFunction
Power on /Charging
GREEN LED ON
completed
RED LED ON | Charging. |
✎NOTE
The indication is the charging state of the built- in battery in iPod main Dock.
Check the charging state of iPod/iPhone by checking the charging indication of its battery.
!CAUTION
The Wireless Transmitter can be only charghed by the supplied adaptor.
iPod/iPhone models that can be used with this product
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod touch (1st generation)
iPod classic
iPod with video
iPod with dock connector
iPod with Click Wheel
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod nano (1st generation)
iPhone 3GS
iPhone 3G
iPhone
✎NOTE
“Made for iPod” means
that an electronic accessory has been
designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
“Made for iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
The volume control may not be operated normally except at the referred models. If there is any error happened at the models above, please update the software of iPod/iPhone at the lastest version.