Samsung HT-C9950W OPTICAL : Connecting an External Digital Component, AUX : Connecting an External Analogue Component, Connecting Audio from External Components, VCR, AUX, NOTE

Connecting Audio from External Components

Audio Cable (not supplied)If the external analogue component has only oneAudio Out, connect either left or right.RedWhiteVCR

	AUX
Optical Cable	Set-Top Box
(not supplied)
	OPTICAL

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).

1.Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital component.

2.Press the FUNCTION button to select D.IN input.

•The mode switches as follows : BD/DVD  D. IN  AUX  iPod  HDMI1  HDMI2  TUNER

✎NOTE

To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.

This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.

This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported.

AUX : Connecting an External Analogue Component

Analogue signal components such as a VCR.

1.Connect AUX IN (Audio) on the product to the Audio Out of the external analogue component.

•Be sure to match connector colours.2.Press the FUNCTION button to select AUX input.

•The mode switches as follows : BD/DVD  D. IN  AUX  iPod  HDMI1  HDMI2  TUNER

✎NOTE

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.

Connections 02

English 31

HT-C9950W_ELS_0914.indd 31 2010-09-14 ￿￿ 6:54:58