Samsung HT-C9950W Speaker Setting, Audio, Setup, NOTE, NOTE, ✎NOTE, Level, ✎NOTE, DPL llz, Distance, 40English, Test Tone, Press the ◄, ► buttons to select All

Setup

Audio

Speaker Setting

DPL llz•Off : Select when you place the Surround Back speakers as shown.

•On: Provide a more realistic 3D surround sound with vertical surround system.

Settings	Speaker Setting
Display	DPL IIz	:	◄ Off
Audio	Level
System	Distance
Network
	Test tone	:	Off
Language
Security
General
Support	<Change		rReturn

✎NOTE

When selecting DPLII Mode, you can listen to 7.1 channel sound from 2CH, 5.1CH audio. With 7.1 channel audio, you can listen to 7.1 channel sound as it is.

LevelYou can adjust the balance and level for each speaker.Adjusting Front/Centre/Surround /Surround Back/Subwoofer Speaker Level•The volume level can be adjusted in steps from +6dB to -6dB.

•The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

Settings	Level
Display	Front L	:	◄ 0 dB
Audio	Front R	:	0 dB
	Center	:	0 dB
System
	Surround L	:	0 dB
Network	Surround R	:	0 dB
	Surround Back L :		0 dB
Language
	Surround Back R :		0 dB
Security	Subwoofer	:	0 dB
General	Test Tone	:	Off
Support	sSelect <Change		rReturn

40 English

Distance

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the front, centre, surround, surround back and subwoofer speakers.

•You can set the Speaker Distance between 1ft(0.3m) and 30ft(9.0m).

Settings	Distance
Display	Front L	: ◄ 10 ft (3.0m)
Audio	Front R	:	10 ft (3.0m)
	Center	:	10 ft (3.0m)
System
	Surround L	:	10 ft (3.0m)
Network	Surround R	:	10 ft (3.0m)
	Surround Back L :		10 ft (3.0m)
Language
	Surround Back R :		10 ft (3.0m)
Security	Subwoofer	:	10 ft (3.0m)
General	Test Tone	:	Off
Support	<Change sSelect		rReturn

Test ToneUse the Test Tone feature to check the speaker connections.Press the ◄, ► buttons to select All.•A test tone will be sent to Front L  Center 

Front R  Surround R  Surround Back R  Surround Back L  Surround L  Subwoofer in order so you can make sure the speakers are set up correctly.

To stop the test tone, press the ◄, ► buttons to select Off.

Settings	Speaker Setting
Display	DPL IIz	:	Off
Audio	Level
System	Distance
Network	Test Tone	: ◄	All
Language
Security
General
Support	<Change		rReturn

✎NOTE

When HDMI Audio is ON (audio is produced through TV speakers), the Test Tone function is not available.

HT-C9950W_ELS_0914.indd 40 2010-09-14 ￿￿ 6:55:15