Connections
This section involves various methods of connecting the product to other external components. Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
Connecting the Speakers
Connecting the Subwoofer
To activate the product, you must connect the subwoofer to the product using the system cable. Most of external connections including power supply, speakers and TV are made through the subwoofer.
!CAUTION
Do not plug or unplug the system cable during the power cord is plugged. Otherwise, it can cause damage to the product.
Attaching the Toroidal Ferrite Core to the Power Cord of the Subwoofer
If you attach a Toroidal ferrite core to the power cord of theSubwoofer, it will help to prevent RF interference from radio signals.1. Pull the fixing tab of the Toroidal ferrite core to open it.2. Make three loops in the power cable of the subwoofer.3. Attach the Toroidal ferrite core to the Subwoofer power cord as the figure shows and press it until it clicks.
Attaching the Toroidal Ferrite Core to the System Cable
1.Pull the fixing tab of the Toroidal ferrite core to open it.2.Insert two cores into one end of the system cable, and the other core into the other end of the system cable (connected between product and subwoofer). Then, press to close the cores until you hear a click as shown.
-Unlike attaching ferrite core to the power cable, do not make loops around the core with the system cable and simply plug in the core and fix it.
22 English