Installing the Speakers on the Tallboy Stand
1.Stretch out the speaker cable and get it through as shown.Connections 02
✎NOTE
1
When installing the front and surround speakers, match the label colour of the stand with the cable colour of the speaker.
Stand Base
Stand Pole
2. Fit the stand pole into the stand base. | 2 |
(if they do not fit with each other, the stand may get tilted from | |
an improper installation.) |
|
Stand Base
Stand Pole
3.Tighten up the screws (large) (3.5x18, x3) as shown.! | 3 |
CAUTION | |
When you use a torque screwdriver, be careful not to put | |
| excessive force. Otherwise, it runs idle or can be damaged. |
| (torque screwdriver- below 15 kg.f.cm) |
English 25