8.Use the ▲▼ buttons to select the device to store the ripped files on, and then press the E button.
NOTES
Do not disconnect the device while ripping is in progress.
9.If you want to cancel ripping, press the E button and then select Yes. Select No to continue ripping.
10.When ripping is complete, the “Successfully ripped.” message appears. Press the Ebutton.
11.Press the RETURN button to go back to the Playback screen.
NOTES
This function is not available with DTS Audio CDs.
This function may not be supported by some discs.
Ripping encodes music to the .mp3 format at 192kbps.
On the Ripping screen, you can also choose Select All or Clear All.
-Use Select All to select all tracks and press the E button. This cancells your individual track selections.
-Use Clear All to deselect all selected tracks at once.
Using BluetoothYou can use a Bluetooth device to enjoy music with high quality stereo sound, all without wires!
What is Bluetooth?Bluetooth is a technology that enables Bluetooth- compliant devices to interconnect with each other easily using a short wireless connection.
•A Bluetooth device may hum or malfunction:
-When a part of your body is in contact with the receiving/transmitting system of the Bluetooth device or the Home Cinema.
-When it is subject to electrical variation from obstructions caused by a wall, corner or office partitioning.
-When it is exposed to electrical interference from same
•Pair the Home Cinema with the Bluetooth device while the two are close together.
•The further the distance is between the Home Cinema and the Bluetooth device, the worse the quality is.
If the distance exceeds the Bluetooth operational range, the connection is lost.
•In poor
•The Home Cinema has an effective reception range of up to 10 meters in all directions if there are no obstacles. The connection will be automatically cut off if the device is out of this range. Even within this range, the sound quality may be degraded by obstacles such as walls or doors.
•This wireless device may cause an electric interference during its operation.
To connect the Home Cinema to a BluetoothdeviceConnect
Bluetooth device
Check if the Bluetooth device supports the Bluetooth compliant stereo headset function.
1.Press the FUNCTION button on the remote control of the product to display the BT message.
2.Select the Bluetooth menu on the Bluetooth device you want to connect. For instructions, refer to the Bluetooth device's manual.
3.Select the Stereo headset menu on the Bluetooth device.
•You will see a list of devices.
4.Select "[HTS]Fxxxxx" from the searched list.
•When the Home Cinema is connected to the Bluetooth device, the device name of the connected Bluetooth device, followed by the name of home cinema will appear on the front display of home cinema.
5.Play music on the connected device.
•You can listen to the music playing on the connected Bluetooth device over the Home Cinema system.
Play Media 05