Samsung HT-F6550W English 23 |, on, Mode, work, Mode, Audio, sound, Setup, Range, Colour, Simple, Speaker, Speaker, Speaker, Channel, Control, speakers, Settings, Settings

	Lets you set the product to output
HDMI Deep	video from the HDMI OUT jack with
	Deep Colour. Deep Colour provides
Colour	more accurate colour reproduction
	with greater colour depth.
Progressive	Lets you improve picture quality
Mode	when viewing DVDs.
		Audio
	Lets you configure the settings of
	the speakers you have connected
	to obtain the best possible surround
	sound.
	 Normal Mode: Select if you
		have set up your speakers in the
		recommended speaker layout with
Simple		the surround speakers next to or
		behind the listening positions.
Speaker		: Select if you have
Setup		Simple Mode
		put your surround speakers in front
		of the listening position. Downmixes
		the front sound to the surround
		sound speakers.
	NOTES
	 DPLII, SFE, Virtual 7.1 will not
		operate when the simple mode is
		on.
	Lets you adjust the following
	speaker settings and turn the test
	tone on and off so you can test the
	speakers.
	 Level: Lets you adjust the relative
		loudness of each speaker from 6db
		to -6db. For example, if you like
		deep bass, you can increase the
Speaker		loudness of the subwoofer by 6db.
		Distance: Lets you adjust the
Settings
		relative distance of each speaker
		from the listening position up to 9
		meters. The farther the distance,
		the louder the speaker will be.
	 Test Tone: Lets you run the Test
		Tone function so you can test your
		adjustments. Setting Test Tone to
		On turns the Test Tone on. Setting it
		to Off turns it off.
Equaliser	Lets you configure the Equaliser
	settings manually.

	Lets you set the product so that
Smart Volume	the volume remains stable when a
	scene change occurs or when you
	change the channel.
Speaker	Lets you select which speakers you
	want active, either the TV's speakers
Selection	or the home cinema's speakers.
	Lets you direct the sound from the
	TV to the Home Cinema speakers.
	Requires a HDMI connection and
	an Audio Return Channel (ARC)
	compatible TV.
	•	If Audio Return Channel is set to
Audio Return		on and you are using an HDMI
		Cable to connect the product to
Channel		the TV, digital optical input will not
	•	work.
		If Audio Return Channel is set to
		auto and you are using an HDMI
		Cable to connect the product to
		the TV, ARC or digital optical input
		is selected automatically.
	Lets you set the Digital Output to
	match the capabilities of the AV
Digital Output	receiver you’ve connected to the
	product. For more details, please
	refer to the digital output selection
	table. (See page 56)
	Lets you apply dynamic range
	control to Dolby Digital, Dolby Digital
	Plus, and Dolby TrueHD audio.
	 Auto: Automatically controls the
		dynamic range of Dolby TrueHD
		audio, based on information in the
Dynamic		Dolby TrueHD soundtrack. Also
		turns dynamic range control off for
Range		Dolby Digital and Dolby Digital Plus.
Control	 Off: Leaves the dynamic range
		uncompressed, letting you hear the
		original sound.
	 On: Turns dynamic range control on
		for all three Dolby formats. Quieter
		sounds are made louder and the
		volume of loud sounds is reduced.
	Lets you select the multi-channel
Downmixing	downmix method that is compatible
	with your stereo system. You
Mode	can choose to have the product
	downmix to normal stereo or in
	surround compatible stereo.

Settings 04

English 23