Samsung HT-F6550W English 27 |, Wireless Network, name, , and, Settings, | NOTES |, -WPS(PBC), | NOTES |, the E button, -Wireless Manual, Network Settings, ❑Wireless - Manual

3.Select the IP setting field, and then set it to Enter manually.

4.Select a value to enter (IP Address, for example), and then press E. Use the number keypad on your remote control to enter the numbers for the value. You can also enter numbers using the ▲▼ buttons. Use the ◄► buttons on the remote control to move from entry field to entry field within a value. When done with one value, press the E button.

5.Press the ▲ or ▼ button to move to another value, and then enter the numbers for that value following the instructions in Step 4.

6.Repeat Steps 4 and 5 until you have filled in all values.

NOTES

You can get the Network values from your Internet provider.

7.When finished entering all the values, select OK, and then press the E button. The home cinema verifies the network connection and then connects to the network.

Wireless Network

You can setup a wireless network connection in three ways:

-Wireless Automatic

-Wireless Manual

-WPS(PBC)

Before you configure the wireless network connection, disconnect any wireless network device currently connected to the product or, if applicable, the product's current wired connection.

❑Wireless - Automatic

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 26:

1.In the Network Settings screen, change Network type to Wireless. The product searches for and then displays a list of the available networks.

Network Settings

2.Select the desired network, and then press the E button.

3.On the Security screen, enter your network's security code or pass phrase.

Enter numbers directly using the number buttons on your remote control. Enter letters by selecting a letter with ▲▼◄► buttons, and then pressing E button.

4.When finished, select Done, and then press the E button. The product verifies the network connection and then connects to the network.

NOTES

You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.

❑Wireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 26:

1.	In the Network Settings screen, change Network
	type to Wireless. The product searches for and
2.	then displays a list of the available networks.
	Scroll through the list, select the desired network or
3.	Add Network, and then press the E button.
	If you selected a network in Step 2, go to Step 6.
4.	If you selected Add Network, go to Step 4.
	Enter your wireless network or wireless router's
	name.
	•	Enter numbers directly using the number buttons
	•	on your remote control.
		Enter letters by selecting a letter with the ▲▼◄►
	•	buttons, and then pressing the E button.
		To display capital letters (or redisplay small letters
		if capital letters are displayed), select	, and
	•	then press the E button.
		To display symbols and punctuation, select
		123#&, and then press the E button. To
		redisplay letters, select 123#&, and then press
		the E button.

Settings 04

Select your network type.

Network type Wireless

Wireless network

si-ap iptime iptime5G

KIMING_VTOWER

TIAS

You can connect your Blu-ray player to the internet. Please select which wireless network to use.

When finished, select Done, and then press the E button.

Refresh WPS(PBC)

English 27