Connections
Connecting to a Network Router |
| Wireless Network |
|
|
|
You can connect your product to your network router using one of the methods illustrated below.
Wired Network
Broadband modem
(with integrated router)
Broadband
service
Or
Router
Broadband
service
Broadband
modem
NOTES
Your router or your Internet Service Provider's policies may prevent the product from accessing Samsung's software update server. If this occurs, contact your Internet Service Provider (ISP) for more information.
DSL users, please use a router to make a network connection.
To use the AllShare function, you must connect your PC to your network as shown in the illustrations on the above.
The connection can be wired or wireless.
Wireless IP sharer
Broadband
service
NOTES
If your wireless IP router supports DHCP, this product can use a DHCP or static IP address to connect to the wireless network.
Set your wireless IP router to Infrastructure mode. Ad- hoc mode is not supported.
The product supports only the following wireless security key protocols:
-WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)
Select a channel on the wireless IP router that is not currently being used. If the channel set for the wireless IP router is currently being used by another device nearby, it will result in interference and communication failure.
In compliance with the newest
Wireless LAN, by its nature, may cause interference, depending on the operating conditions (AP performance, distance, obstacles, interference by other radio devices, etc).