Samsung HT-J5500 manualSettings

Settings

2.When you have completed the procedure, you should see a pop-up on your TV screen saying that a device that supports Wi-Fi Direct has requested to connect. Confirm that the device that is making the request is your device, select Yes in the pop up, and then press the E button to accept.

3.The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed as connected on the Wi-Fi Direct screen.

~The PBC and PIN procedures connect devices automatically.

Through the Product Using PBC

1.Select the Wi-Fi Direct device you want to connect to this product, and then press the E button.

2.The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed as connected on the Wi-Fi Direct screen.

Through the Product Using a PIN

1.Select the Wi-Fi Direct device you want to connect to this product, and then press the E button.

2.The PIN pop-up appears.

3.Note the PIN code in the pop-up, and then enter it into the appropriate field in the Wi-Fi Direct device you want to connect.

4.The Connecting pop-up appears, followed by the Connected pop-up. When it closes, you should see the device listed as connected on the Wi-Fi Direct screen.

✎The current wired or wireless network connection will be disconnected when you use the Wi-Fi Direct function.

✎Text files, such as files with a .TXT or .DOC extension, will not display when you are using the Wi-Fi Direct function.

Upgrading Software

The Software Upgrade menu allows you to upgrade the product’s software for performance improvements or additional services.

~Never turn the product off or back on manually during the update process.

~The update is complete when the product turns off after restarting. Press the POWER button to turn on the updated product for your use.

~Samsung Electronics takes no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade.

1.In the Home menu, select Settings, and then press the E button.

2.Select Support, and then press the E button.

3.Select Software Upgrade, and then press the E button.

4.Select one of the following methods:

~By Online

~By USB

~Auto Upgrade Notification

5.Press the E button.

Directions for each method begin below.

✎If you want to cancel the upgrade while the upgrade software is downloading, press the E button.

By Online

Your product must be connected to the Internet to use the By Online function. Remove all discs before you begin.

1.Select By Online, and then press the E button. The Connecting to Server message appears.

2.If an update is available, a popup message appears asking if you want to upgrade. If you select Yes, the product turns off automatically, turns on, and then begins the upgrade.

3.The update progress popup appears. When the update is completed, the product turns off automatically again.

4.Press the POWER button to turn on the product.

26 - English