Contents
GETTING STARTED
5Accessories
5Speaker Components
6Front Panel
7Rear Panel
8Remote Control
CONNECTIONS
9Connecting the Speakers
13Connecting to a TV and External Devices
14Connecting to a Network Router
SETTINGS
15The Initial Settings Procedure
16The Home Screen at a Glance
16Accessing the Settings Screen
17Settings Menu Functions
20Radio Setup
22Network Setup
25
26Upgrading Software
27Setting Up DLNA
PLAYING CONTENT
28Switching the Source Device
28Playing Commercial Discs
28Playing a Disc with User Recorded Content
29Playing Files on a USB Device
30Controlling Video Playback
32Playing a
32Controlling Music Playback
34Playing Photo Content
34Using Bluetooth
36Using the Special Effects Remote Control Buttons
NETWORK SERVICES
37Using
37Using DLNA
37Apps
38Using Opera TV Store
39Screen Mirroring
APPENDIX
40Additional Information
41Disk and Format Compatibility
46Troubleshooting
49Specifications
51Licences
Wiring the Main Power Supply Plug (UK Only)
IMPORTANT NOTICE : The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used. Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains socket. A plug and fuse must be used at all times.
IMPORTANT : The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN = LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as
IMPORTANT : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH LETTER E OR BY THE EARTH SYMBOL U, OR COLOURED GREEN OR GREEN AND YELLOW.
4 - English