Disc Playback
| G |
| |
Data CDs |
|
MP3 |
|
Press OPEN/
3 CLOSE button to close the disc tray.DVD VCD CD•Playback starts automatically.1 OPEN/CLOSE button to open the disc tray, and then load the MP3 disc.
press the ENTER button.In Stop mode, use
•Depending on the content of the disc, the initial screen may appear different.
•If pressed once, “PRESS PLAY” is displayed and the stop position will be stored in memory.
If PLAY/PAUSE (
•If pressed twice, “STOP” is displayed, and if PLAY/PAUSE (
•To resume playback, press PLAY/PAUSE (
Selecting the Video Format
Press and hold NT/PAL button on the remote controller for over 5 seconds while the power is turned off.
•The MP3 menu screen will appear and playback will start.
•The appearance of the menu depends on the MP3 disc.
To change the album,3 use•To select another album and track, repeat Steps 2 and 3 above.
OPERATION
4 Press the STOP button to stop playback.•By default, the video format is set to "PAL".
•"NTSC" or "PAL" will appear in the display.
At this time, press the NT/PAL button shortly to select between "NTSC" and "PAL".
•Each country has a different video format standard.
•For normal playback, the video format of the disc must be the same as the video format of your TV.
Note
• Table of contents of a
• MP3 file support: MPEG1 LAYER3 (BITRATE : 128KBPS~320KBPS , SAMPLEING FREQ.: 32K/44.1K/48KHz)
17 | 18 |