Connecting External Component

Connecting the FM Antenna

G

 

Connecting an External Analog Component

Example: Analog signal components such as a VCR or TV.

Audio Cable

(not supplied)

If the external analog

component has only one Audio Out, connect either left or right.

If AM reception is poor, connect an outdoor AM antenna(not supplied).

FM Antenna (supplied)

FM antenna connection

AM Loop Antenna (supplied)

Snap the tabs on the loop into the slots of the base to assemble the AM loop antenna.

AM antenna connection

CONNECTIONS

1 Connect Audio In on the DVD player to Audio Out on the external analog component.

Be sure to match connector colors.

2 Press AUX on the remote control to select AUX.

You can also use the FUNCTION button on the main unit.

The mode switches as follows: DVD/CD AUX FMAM.

1.Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal.

2.Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

1.Connect the AM loop antenna supplied to the AM and terminals.

Insert the black wire into the black terminal and the white wire into the white terminal.

2.If reception is poor, connect an outdoor single vinyl-covered wire to the AM terminal. (Keep the AM loop antenna connected).

Cooling Fan

The cooling fan supplies cool air to the unit to prevent overheating.

Please observe the following cautions for your safety.

Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise and may damage it.

Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)

15

16