Samsung HT-Q9 HT-Q9R/ELS, HT-Q9T/XSG Setting the Test Tone, Setting the DRC, Setting the DRC (Dynamic Range Compression), MENU, MENU, MENU, MENU, ENTER, ENTER, SETUP, RETURN, RETURN, TEST TONE

Start

L: Front Speaker (L) C: Center Speaker SW: Subwoofer

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.

Setting the DRC (Dynamic Range Compression)

This feature balances the range between the loudest and quietist sounds.

You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

GB

	In Stop or no		2	Press Cursor	but-		Press Cursor	button
	disc mode,			ton to move to ‘Audio’			to move to ‘TEST
1 press MENU				and then press		3	TONE’ and then press
				ENTER button.			ENTER button.
	button.
						• The test tone will be sent to L ➝ C ➝
						R ➝ SR ➝ SL ➝ SW in order.
						If the ENTER button is pressed again
						at this time, the test tone will stop.
	MOVE ENTER	EXIT		MOVE ENTER	EXIT
							MOVE ENTER RETURN	EXIT

1 In Stop or no disc mode, press MENU button.

MOVE ENTER EXIT

Press Cursor 2 button to move to

‘Audio’ and then press ENTER

button.

MOVE ENTER EXIT

Press RETURN button to return to the previous level.

STOPEXIT

Press MENU button to exit the setup screen.

Alternate method: press the TEST TONE button on the remote. Press TEST TONE button.

•	R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)
	Test tone will be produced as follows:

When playing a DVD or CD, this will work only in Stop mode.

Press Cursor 3 button to move to

‘DRC’ and then press ENTER button.

4 Press Cursor , to adjust

the ‘DRC’.

•When the Cursor button is pressed, the effect is greater, and when the

Cursor button is pressed, the effect is smaller.

SETUP

• Use this function to check that each speaker is correctly connected and that there is no problem.

To end the test tone,

press TEST TONE button again.

Multi-Channel Pro Logic Mode

MOVE ENTER RETURN EXIT CHANGE RETURN EXIT

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

47 48