Samsung HT-Q9 HT-Q9R/ELS, HT-Q9T/XSG Listening to Radio, Presetting Stations, OPERATION RADIO, TUNER, MO/ST, TUNING, Main Unit, Remote Control Unit, 2 Tune in to the desired station, Note, TUNER

Listening to Radio

Presetting Stations GB

Remote Control Unit

Example: Presetting FM 89.1 in the memory

1Press the TUNER button and select the FM band.

Main Unit

2 Tune in to the desired station.

Automatic Tuning 1	When	is pressed, a
	preset broadcast station is
	selected.
	Press and hold TUNING(
Automatic Tuning 2			,	)
	to automatically search for active
	broadcasting stations.
Manual Tuning	Briefly press TUNING( ,			) to

increase or decrease the frequency incrementally.

1Press the TUNER button and select the FM band.

Press TUNING		Press the TUNER
2 ( , ) to select	3
		MEMORY button.
"89.10".
• Refer to Step 2 on page 61 to	• “PRGM” flashes in the display.
automatically or manually tune in
to a station.

1Press the FUNCTION button to select the FM band.

2 Select a broadcast station.

	Press the STOP (		)
Automatic Tuning 1
	button to select
PRESET and then press
button to select the preset station.
	Press the STOP (	)
Automatic Tuning 2
	button to select "MANUAL"

and then press and hold button to automatically search the band.

Manual Tuning Press STOP ( ) to select MANUAL and then briefly

press to tune in to a lower or

higher frequency.

Press	5	Press the TUNER
4 to select preset		MEMORY button
number.		again.

•You can select between 1 and 15 presels.

Note • This unit does not receive AM broadcasts.

6 To preset another station, repeat steps 2 to 5.

OPERATION RADIO

Press MO/ST button to listen in Mono/Stereo.

(This applies only when listening to an FM station.)

55	• Each time the button is pressed, the sound switches between "STEREO" and "MONO".
	• In a poor reception area, select MONO for a clear, interference-free broadcast.

To tune in to a preset station, press on the remote control to select a channel.

56