Connecting an External Digital Component
Example: Digital signal components such as a DVD or CD Recorder.
VOLTAGE
SELECTOR
Optical Cable (not included)
The AC Cord must be plugged into an appropriate socket.
Before plugging your system into an AC outlet, you must check the voltage.
Check the position of the voltage selector on the rear of the
DIGITAL OUT system (OPTIONAL).
1. Plug the AC Cord on the rear of the system into an appropriate outlet.
2. Press the On/Standby button to switch your DVD Player system on.
1 Connect the Digital Input (OPTICAL) to the Digital Output on the external digital component.
2 Press AUX on the remote control to select ‘DIGITAL IN’.
•Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
•You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
Connecting an External Analog Component
Example: Analog signal components such as a VCR, Camcorder, and TV.
VOLTAGE
SELECTOR
Audio Cable
If the external
analog component has only one Audio Out, connect either left or right.
L
VIDEO OUT | VIDEO IN | COMPONENT VIDEO OUT |
1 Connect Audio In on the DVD player to Audio Out on the external analog component.
•Be sure to match connector colors.
2 Press AUX on the remote control to select AUX 1 or AUX 2.
•Each time the button is pressed, the selection changes as follows: DIGITAL IN ➝ AUX 1 ➝ AUX 2.
•You can also use the FUNCTION button on the main unit.
The mode switches as follows: DVD/CD ➝ DIGITAL IN ➝ AUX1 ➝ AUX2 ➝ FM ➝ AM.
CONNECTIONS
15 | 16 |