Samsung 2-Kanal Flat Soundbar Sound+HW-MS550 HW-MS550/EN, HW-MS550/ZG ENG, Done, NOTE, Settings, Soundbar, Add Speaker, Surround Setup, Samsung Multiroom, and one Soundbar.), On the Home screen of the

Installing an additional Soundbar when Samsung wireless speakers are already in use

1.On the Home screen of the Samsung Multiroom app, select Settings () at the top, and then select “Add Speaker”.

2.To connect the Soundbar to 2 Samsung wireless speakers and configure a surround sound system, follow the steps shown below. (You cannot set up a surround sound system using one audio device

and one Soundbar.)XXTouch to go to the list of all speakers.YYTouchon the right of the Soundbar model name.

ZZTouch Surround Setup. Select Done after dragging the speaker to the desired location. [[The Surround connection is complete.

Soundbar

NOTE

•• To connect an additional SWA-9000S (not supplied), disconnect the Samsung wireless speakers from the Soundbar to disable the surround sound system. (If connecting the surround speakers without disconnecting SWA-9000S, sound is played via both the Samsung wireless speaker and the Surround speaker.)

ENG - 21