Samsung Moniteur 105" - 500 cd/m² - UHD - QM105D LH105QMDNC/EN Connecting to a Video Device, Connection Using an HDMI-DVICable, SOURCE, RGB / DVI / HDMI / AUDIO IN, HDMI IN 1, HDMI IN 2, HDMI IN

Download on canonical page 122 pages, 2.43 Mb

Connecting to a Video Device

•• Do not connect the power cable before connecting all other cables.

Ensure you connect a source device first before connecting the power cable.

•• You can connect a video device to the product using a cable. ――Connecting parts may differ in different products.

――Press the SOURCE button on the remote control to change the source.

Connection Using an HDMI-DVI Cable

――Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device.

――Supported resolutions include 1080p (50/60Hz), 720p (50/60Hz), 480p, and 576p.

HDMI IN 1, HDMI IN 2, HDMI IN 3

RGB / DVI / HDMI / AUDIO IN

Models

LH105QMDNC/EN

1QM105D
2Table of contents
5Before Using the Product
- Copyright
- 6Safety Precautions
  - Cleaning
  - Symbols
  - 7Storage
  - Electricity and Safety
    - 8Do not disconnect the power cord while the product is being used
    - •• The product may become damaged by an electric shock
  - 10Operation
    - 11•• An explosion or fire may result
    - Ensure the vents are not blocked by tablecloths or curtains
    - output ports, etc)
    - •• Product failure, an electric shock or fire may result
    - Use the product at the recommended resolution and frequency
    - •• Your eyesight may deteriorate
    - Do not hold the product upside-downor move it by holding the stand
    - •• The product may fall and become damaged or cause an injury
    - Do not use humidifiers or stoves around the product
    - 12Rest your eyes for more than 5 minutes for every 1 hour of product use
    - •• Eye fatigue will be relieved
    - Store small accessories out of the reach of children
    - Exercise caution when adjusting the product angle or stand height
    - When replacing the battery, insert it with the right polarity (+, -)
    - •• Your hand or finger may get stuck and injured
    - the used or rechargeable batteries for recycling
    - •• The customer can return used or rechargeable batteries to a nearby
    - ! public recycling centre or to a store selling the same type of the
    - battery or rechargeable battery
    - Do not place heavy objects on the product
    - When using headphones or earphones, do not turn the volume too high
    - •• Having the sound too loud may damage your hearing
  - 13Precautions when handling the panel
14Preparations
- Checking the Components
  - Components
  - 15Items sold separately
- 16Parts
  - Control Panel
    - Buttons
    - Description
    - 17Return
  - 18Reverse Side
    - Port
  - 19Remote Control
    - Quickly select frequently used functions
    - Return to the previous menu
    - It sets safe lock function
    - using the remote control
    - 20To place batteries in the remote control
      - Display information about the current input source
      - Move to the upper, lower, left or right menu, or adjust an option's setting
      - Confirm a menu selection
      - Exit the current menu
  - 21Connection Using an IR Stereo Cable (sold separately)
- 22Tilting Angle and Rotation
- Ventilation
  - Plane view
- 23Dimensions
  - Model name
- 24Installing the Wall Mount
  - Installing the Wall Mount
  - Wall Mount Kit Specifications (VESA)
    - VESA screw hole
    - Standard Screw
    - Quantity
    - specs (A * B) in
    - millimeters
- 25Remote Control (RS232C)
  - Cable Connection
    - Pin
    - 26Pin No
    - Standard Colour
    - 27Direct LAN cable (PC to HUB)
    - Cross LAN cable (PC to PC)
  - 28Connection
  - 29Control Codes
    - No
    - Value range
    - 30Power control
      - Function
      - •• Setting power ON/Off (Set Power ON / OFF)
      - "Power": Power code to be set on a product
      - 1:Power ON
      - 0:Power OFF
      - •• Ack
      - •• Nak
      - "ERR" : A code showing what error has occurred
    - Volume control
      - •• Function
      - The volume of a product can be adjusted using a PC
      - •• Viewing volume state (Get Volume Status)
      - •• Setting the volume (Set Volume)
      - "Volume": Volume value code to be set on a product. (0-100)
    - 31Input source control
      - •• Setting the input source (Set Input Source)
      - "Input Source": An input source code to be set on a product
    - 32Screen size control
    - 33PIP On/Off control
      - •• Viewing PIP on/off state (Get the PIP ON / OFF Status)
      - •• Setting PIP on/off (Set the PIP ON / OFF)
      - "PIP": A code used to turn the PIP mode of a product on or off
      - 1:PIP ON
      - 0:PIP OFF
    - Auto adjustment control (PC and BNC only)
      - Automatically adjust the PC system screen using a PC
      - •• Viewing auto adjustment state (Get Auto Adjustment Status) None
      - •• Setting auto adjustment (Set Auto Adjustment)
      - "Auto Adjustment" : 0x00 (at all times)
    - 34Video Wall Mode Control
      - Video Wall mode can be activated on a product using a PC
      - This control is only available on a product whose Video Wall is enabled
      - •• Viewing video wall mode (Get Video Wall Mode)
      - •• Setting the video wall (Set Video Wall Mode)
      - "Video Wall Mode": A code used to activate Video Wall mode on a product
      - 1:Full
      - 0:Natural
    - Safety Lock
      - •• Viewing the safety lock state (Get Safety Lock Status)
      - •• Enabling or disabling safety lock (Set Safety Lock Enable / Disable)
      - "Safety Lock": Safety lock code to be set on a product
      - 1:ON
      - 0:OFF
    - 35Video Wall User Control
    - 3610x10 Video Wall Model
    - 3710x10 Video Wall Model : ( 1 ~ 100)
38Connecting and Using a Source Device
- Before Connecting
  - Pre-connectionCheckpoints
- Connecting to a PC
  - Connection using the D-SUBcable (Analogue type)
  - 39Connection using a DVI cable (Digital type)
- 41Connecting to a Video Device
  - Connection Using an HDMI-DVICable
- 42Connecting to an Audio System
  - AUDIO OUT
- 43Connecting the LAN Cable
- 44Attaching the Network box (Sold separately)
- 45Connecting the Network box (Sold separately)
  - MagicInfo
    - 46Enter the IP information
    - 6 Select a display mode
    - 7 Double-checkthe settings you have just configured
- 47Changing the Input source
  - Source
    - Source
48Using MDC
- Uninstallation
- 49Connecting to MDC
  - Using MDC via RS-232C(serial data communications standards)
  - 50Using MDC via Ethernet
    - 51RJ45
52Home feature
- 54On/Off Timer
  - On/Off Timer
  - On Timer
  - Off Timer
  - 55Holiday Management
- 56Network Settings
  - Network Settings
- 57MagicInfo Player
  - MagicInfo Player
- 58ID Settings
  - ID Settings
  - Device ID
  - PC Connection Cable
- 59Video Wall
  - Video Wall
  - Horizontal x Vertical
  - 60Screen Position
  - Format
- 61More settings
  - More settings
62Screen Adjustment
- 64Color Temperature
- White Balance
- 65Gamma
- Calibrated Value
- 66Picture Options
  - Picture Options
    - Color Tone
    - Digital NR
    - HDMI Black Level
    - Film Mode
  - 67Color Tone
  - Digital NR
  - HDMI Black Level
  - Film Mode
  - 68Auto Motion Plus
    - Blur Reduction
    - Judder Reduction
  - Dynamic Backlight
- 69Picture Size
  - Picture Size
  - 70Zoom/Position
  - Resolution
- 71Auto Adjustment
- PC Screen Adjustment
- 72Picture Off
- Reset Picture
73OnScreen Display
- 78Rotation
  - Rotation
    - Rotate Menu
    - Rotate Content
    - Aspect Ratio
  - Rotate Menu
  - Rotate Content
  - Aspect Ratio
- 79Screen Protection
  - Pixel Shift
    - Available Settings
    - Optimum Settings
  - 80Timer
  - Immediate Display
  - Side Gray
- 81Message Display
  - Message Display
    - Source Info
    - No Signal Message
    - MDC Message
  - Source Info
  - No Signal Message
  - MDC Message
- 82Menu Language
- Reset OnScreen Display
83System
- Setup
  - Initial settings (System)
- 84Time
  - Time
    - Clock Set
    - DST
    - Sleep Timer
    - Power On Delay
  - Clock Set
  - DST
  - Sleep Timer
  - Power On Delay
- 85MagicInfo I Source
- 86Auto Source Switching
  - Auto Source Switching
    - Primary Source Recovery
    - Primary Source
    - All
    - Secondary Source
  - Auto Source Switching
  - Primary Source Recovery
  - Primary Source
  - Secondary Source
- 87Power Control
  - Power Control
    - Auto Power On
    - PC Module Power
    - Standby Control
    - Auto
    - Network Standby
    - Power Button
  - Auto Power On
  - PC Module Power
  - 88Standby Control
  - Network Standby
  - Power Button
- 89Eco Solution
  - Eco Solution
    - Energy Saving
    - Screen Lamp Schedule
    - No Signal Power Off
    - Auto Power Off
  - Energy Saving
  - Eco Sensor
  - Screen Lamp Schedule
- 90Temperature Control
  - No Signal Power Off
  - Auto Power Off
- 91Change PIN
- 93Reset System
94Sound Adjustment
- HDMI Sound
  - Sound
    - HDMI Sound
      - AV(HDMI)
    - Sound on Video Call
    - Reset Sound
- 95Sound on Video Call
- Speaker Selection
- 96Reset Sound
97Support
- Software Update
- Contact Samsung
- 98Go to Home
  - Picture Mode
  - On/Off Timer
  - Network Settings
  - MagicInfo Player
  - 99ID Settings
  - More settings
- 100Reset All
  - Support
    - Reset All
101Troubleshooting Guide
- Testing the Product
- Checking the Resolution and Frequency
- 102Check the followings
  - Installation issue (PC mode)
  - Screen issue
  - 104Sound issue
  - 106Remote control issue
  - Source device issue
  - 107Other issue
  - 109Question
  - Answer
111Specifications
- 113PowerSaver
  - PowerSaver
  - Normal Operation
  - Power saving mode
  - Power off
  - Rating
  - Max
  - DPM Mode)
- 114Preset Timing Modes
  - 115Pixel Clock
  - Sync Polarity
  - (kHz)
  - (Hz)
  - (MHz)
117Appendix
- Not a product defect
- A Product damage caused by customer's fault
- Others
- 118WEEE
  - Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
  - Correct disposal of batteries in this product
- 119Optimum Picture Quality and Afterimage Burn-inPrevention
  - Optimum Picture Quality
  - Prevention of Afterimage Burn-in
- 121Licence
- 122Terminology

Connecting to a Video Device

Connection Using an HDMI-DVI Cable

Models

Contents