Samsung 400MX-3 User Auto Color, Standby Control, •On, Off, •On, DVI, Note, •Off, Auto, Note, HDMI, Auto, HDMI, •Auto, 2.Reset, No Signal, No Signal, 1.Auto Color

Adjusting the LCD Display

•On

User Auto Color

1.Auto Color

Automatically adjusts the Colors.

2.Reset

Resets the Color settings.

Note

Enabled only in PC mode.

Standby Control

Sets the standby mode, which will be activated when no input signal is detected.

•Off

A message will read <No Signal> if no input signal is detected.

•On

Power-saving mode will be activated if no input signal is detected.

•Auto

When no input signal is detected,

-Power-saving mode will be activated if an external device is connected.

-A message will read <No Signal> if no external device is connected.

Note

•Enabled only in PC, DVI, HDMI, or DP(DisplayPort) mode.

•Auto will be disabled in HDMI mode.