Adjusting the LCD Display

The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed.

Note

Available in PC mode only.

Signal Balance

This is used to make up for the weak RGB signal transmitted by a long signal cable.

Note

Not available when Dynamic Contrast is set to On.

Available in PC mode only.

Signal Balance

Selects either On or Off with the signal balance.

Signal Control

Note

Available when Signal Balance is set to On.

1.R-Gain2.G-Gain3.B-Gain4.R-Offset5.G-Offset
6.B-Offset