Connections

2.Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the [AV /COMPONENT AUDIO IN [R-AUDIO-L]]on the LCD Display .

3.Press SOURCE on the product or remote control and select "AV".

4.Then, start the Camcorders with a tape inserted.

Note

The audio-video cables shown here are usually included with a Camcorder.

(If not, check your local electronics store.)

If your camcorder is stereo, you need to connect a set of two cables.

Connecting Using a HDMI Cable

1.Connect an HDMI cable to [HDMI IN 2 (MAGICINFO)] or [HDMI IN 1] on the product and the HDMI output port on a digital device.

2.Press SOURCE on the product or remote control and select "HDMI1 / HDMI2"

Note

In HDMI mode, only PCM format audio is supported.