Troubleshooting for Anynet+
Problem | Possible Solution | |
|
| |
Anynet+ does not work. | •• Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. | |
| •• Check if the Anynet+ device power cord is properly connected. | |
| •• Check the Anynet+ device’s Video/Audio/HDMI cable connections. | |
| •• Check whether Anynet+ | |
| •• Check whether the remote control is Anynet+ compatible. | |
| •• Anynet+ doesn’t work in certain situations. (initial setup) | |
| •• If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn your | |
| product off and on again. | |
| •• Check if the Anynet+ function of the Anynet device is set on. | |
|
| |
I want to start Anynet+. | •• Check if the Anynet+ device is properly connected to the product and check if the Anynet+ | |
| in the System menu. | |
|
| |
I want to exit Anynet+. | •• Press the SOURCE button on the product remote control and select a non- Anynet+ device. | |
|
| |
The message “Disconnecting | •• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. | |
Anynet+ device ...” appears on the | •• Use the remote control after the product has completed Anynet+ configuration or has finished switching to | |
screen. | ||
Anynet+. | ||
| ||
|
| |
The Anynet+ device does not play. | •• You cannot use the play function when initial setup is in progress. | |
|
| |
The connected device is not | •• Check whether or not the device supports Anynet+ functions. | |
displayed. | •• Check whether or not the HDMI cable is properly connected. | |
| ||
| •• Check whether Anynet+ | |
| •• Search Anynet+ devices again. | |
| •• Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable. | |
| •• Some HDMI cables may not support Anynet+ functions. | |
| •• If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, | |
| please repeat the device scan. | |
|
|
123