Samsung 941MG Remote Control

1. R - AUDIO - L

: Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the R-AUDIO-Lport of the monitor.

2. PR, PB,Y

: Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the PR, PB,Y input ports using a component video cable (PR, PB,Y).

5.ANT IN

! Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the monitor. Make sure to use a TV antenna cable (sold separately) as the antenna cable.

6.

! The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately.)

For using a locking device, contact where you purchase it.

7./ S-VIDEO / VIDEO / L - AUDIO - R

1. Connect your headphones to the Headphone connection terminal.

2. S-VIDEO / VIDEO

: Input devices such as DVD, VCR or Camcorder are connected to the VIDEO or S-VIDEO terminal of the monitor using the Video or S-Video cable.

3. L - AUDIO - R

: Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the L - AUDIO - R port of the monitor.

See Connecting the monitor for further information regarding cable connections.

Remote Control

The performance of the remote control may be affected by a TV or other electronic device operated near

the monitor, causing malfunction due to interference with frequency.