Sort | It's used to exchange the numbers of two channels. |
|
|
Name If channel name information is broadcast when you store the channels either manually or automatically, the names are assigned to the channels directly. You can however change these names or assign new names as required.
Fine Tune Due to weak signals or an incorrect antenna configuration, some of the channels may not be tuned correctly.
Setup
Available Mode
The default setting may be different depending on the selected Input Mode (input signal SOURCE selected in External Input List) and the selected resolution.
OSD | Description | Play / Stop |
Language | You can choose one of 8 languages. |
|
| Note : The language chosen affects only the language of the OSD. | |
| It has no effect on any software running on the computer. | |
Sleep Timer | Turns the monitor off after a | |
| 1) Off 2) 30 3) 60 4) 90 5) 120 6) 150 | 7) 180 |
Transparency Changes the opaqueness of the background of the OSD.
1)High
2)Medium
3)Low
4)Opaque
Blue Screen If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue screen" mode to "Off".