Auto | The values of Fine, Coarse, Position are adjusted automatically. |
Adjustment | By changing the resolution in the control panel, auto function is performed. |
| - The direct button on the remote control is the 'AUTO' button. |
| - Available in PC Mode Only |
Size | You can switch the Size. |
| The direct button on the remote control is 'P.SIZE' button. |
1)Wide
2)4:3
PIP Picture You can adjust the PIP Screen Settings.
-Available in PC / DVI Mode Only
1)Contrast
:Adjusts the Contrast of the PIP window on the screen.
2)Brightness
:Adjusts the Brightness of the PIP window on the screen.
3)Sharpness
:Adjusts the Sharpness of the PIP window on the screen.
4)Colour
:Adjusts the Colour of the PIP window on the screen
5) Tint
: Adds a natural tone to the PIP window.
The Tint is connected by switching to NTSC from PAL broadcasting and is displayed on the menu while watching. But it is not displayed when watching a general PAL broadcast.
For more information, see Broadcasting system by Country.
Available : PIP ON
| Available Mode : PC / DVI : TV : Ext. : AV : | : Component | ||
| The default setting may be different depending on the selected Input Mode (input signal | |||
| SOURCE selected in External Input List) and the selected resolution. |
|
| |
OSD |
| Description |
| Play / Stop |
Mode |
| The Monitor has four automatic picture settings ("Dynamic", "Standard", |
| |
|
| |||
|
| "Movie", and "Custom") that are preset at the factory. |
|
|
|
| You can activate either Dynamic, Standard, Movie, or Custom. You can |
| |
|
| select "Custom" which automatically recalls your personalized picture |
| |
|
| settings. |
|
|
|
|
|
|
|