Samsung MZ-7KM480 manual 39

Samsung SSD Magician DC 39

Trim Command

Trim sends LBA ranges information of invalid data such that the SSD can know the corresponding data inside the SSD is invalid.

The below given CLI input will perform the trim operation on the selected disk:

magician --disk 1 --trim or

magician -d 1 –T

Firmware Update

This feature is useful for changing SSD's firmware from old version to new version.

The firmware update package includes firmware update policy file - DSRD.enc and the new firmware. Samsung will provide the firmware update package separately.

The below given CLI input will perform the firmware update operation on the selected disk:

magician --disk 1 --firmware-update -p <fw-path> or

magician -d 1 -F -p <fw-path>

Erase

Erase feature is designed to remove all user data from a drive permanently. This command will put the drive back to its original out-of-box state. This will initially restore its performance to the highest possible level and the best (lowest number) possible write amplification.

The below given CLI input will perform the erase operation on the selected disk:

magician --disk -1 --erase or

magician -d 1 -E

Note: When the disk is in frozen state, the user has to unplug and plug-in the power cable and restart the erase operation.

Write amplification is an issue that occurs in SSDs that can decrease the lifespan of the SSD and impact performance. The lower the write amplification, the longer will be the lifespan of SSD.