Samsung R700-Aura T5750 NP-R700 Display Related

Display Related

QThe LCD screen is too dark or too bright.

ATurn on the LCD backlight or adjust the screen brightness. Press Fn +

to turn on the LCD backlight or press Fn + , Fn + to adjust the screen brightness.

QThe screen saver disturbs screen viewing during Media Player or video file operation.

AClick Tools > Options > Player and then clear the Allow screen saver during playback in the Media Center check box.

QWhen I connect an external display and change the settings to display the screen image on both the LCD and the external display by pressing the Fn + key combination, the screen is not displayed properly.

APress Fn + key combination again. If the screen is still not displayed or only part of the screen is displayed by doing this, that means the LCD resolution is too low or too wide and the external display support the resolution. Right-click over the Desktop, select Properties, select the Settings tab and change the resolution to 800 x 600.

QThe Taskbar on the bottom of the screen does not appear when a projector is used as the display device.

AThis may happen, if the projector does not support LCD resolution. In this case change the resolution to 800 x 600 (recommended) on your computer.

158