Samsung R700-Aura T5750 NP-R700 General, Install, Properties, automatically, Connect using:, Internet Protocol(TCP/IP), Select Obtain an IP address, Use the following IP address

4 Click General tab and select a LAN driver from Connect using:. Select Internet Protocol(TCP/IP) and click Properties.

The displayed LAN driver may vary depending on the LAN device type.

Click Install to add a network component as shown in the figure below: You can add a client, a service, or a protocol.

5 Configure IP settings.

Select Obtain an IP address

automatically when using DHCP. If you use a static IP, select Use the following IP address and enter the values.

If the IP of your computer is not automatically assigned, contact the network administrator.

6 If all settings are made, click OK. Now the network configuration is finished.

91