Samsung RS21FANS ADJUST THE CLEARANCE BETWEEN THE DOORS

ADJUST THE CLEARANCE BETWEEN THE DOORS

Making small adjustments between doors.

If the door of the freezer is lower than that of the refrigerator.

If the door of freezer is higher than that of the refrigerator.

Adjustment part Adjustment part

Please open the doors and adjust the doors as follows:

1) Release the nut (①) on the lower hinge until the upper end of the bolt (➁).

When you release the nut(①), use enclosed hex wrench (➂) to turn the bolt(➁) a little counter- NOTE clockwise to make the nut(①) loose with your fingers.

➂ WRENCH ➂ WRENCH

➀ NUT		➀ NUT
	➁ BOLT	➁ BOLT

2)Please adjust the height difference between the doors turning the bolt (➁) turn clockwise() or counter

clockwise ( ).

When you turn clockwise ( ), the door goes up.

NOTE

➂ WRENCH ➂ WRENCH

➁ BOLT ➁ BOLT

3)After adjusting the doors, turn the nut (①) turn clockwise( ) until the lower end of the bolt, then tight- en the bolt again with the wrench (➂) to fix the nut(①).

➂ WRENCH ➂ WRENCH

➀ NUT	➀ NUT
➁ BOLT
	➁ BOLT

If you do not fix the nut (①)firmly the bolt (➁) may be released