1) Slip the compression nut and plastic ferrule through the plastic tube.
2)After inserting the sleeve, tighten the compres- sion nut onto 1/4” compression fitting(union).
Do not overtighten the compression
NOTE nut.
3) Slip the compression ferrule and nut on copper (or plastic) tubing as shown.
Tighten the comperssion nut onto the compression fitting(union).
4) Turn water on and check for any leakege.
NOTE Water line must be connected to drinkable water only
Ferrule
Sleeve
Install the water filter.
1)As shown, the fixed cap separates from the refrigerator by rotat- ing it counterclockwise.
Remove the water filter from the box and put a month indicator sticker on the filter as shown.
2)If the water filter was installed in March, put on the "SEP" sticker.
3)Remove the protective cap then position and insert the filter as shown.
4)Slowly turn the water filter clockwise 90º to align
the indication mark on the cover, locking the filter in posi tion. Do not overtighten.
SEPARATION
OF RED CAP
STICKER
(MONTH INDICATION)
(A)
COVER FILTER
ALIGN THE INDICATION MARK WITH LOCK POSITION.
Please check that the indication line aligns with the lock position.