4.Remove the filter’s protective cap and then position and insert the filter into the filter housing.
5.Slowly turn the water filter clockwise 90º to align with the indication mark on the cover, locking the filter in position. Make sure that the indicator is lined up with the “lock” position. Remember, do not
If your model contains wine shelf, you should remove the wine shelf before installing water filters.
Separation | Align the indication |
of red cap | mark with lock position |
instaLLing tHE watEr DisPEnsEr LinE
For Interior model
Parts for water line Installation
|
|
| Purifier lock |
|
Water line fixer and | Pipe | Water line | station |
|
Tightening band |
| |||
screws | connector |
| Purifier |
Connecting to the water supply line
Connect the water pipe with coupler and tap.
1.Close the main water tap.
2.Connect coupler “A” to the tap. Note:
CAUTION
The water line must be connected to the cold water pipe. If it is connected to the hot water pipe, it may cause the purifier to malfunction.
WARRANTY INFORMATION
This water line installation is not covered by the | COUPLER “A” |
refrigerator or ice maker manufacturer’s warranty. |
|
Follow these instructions carefully to minimise the risk of |
|
expensive water damage. |
|
Note:
If the coupler does not fit on the current tap, go
the nearest authorised service dealer and purchase the right couplers fittings.
select the location where the purifier is to install. (Model with the purifier)
-If you wish to reassemble the water inlet and outlet sides of the purifier during purifier installation, see the reference illustration.
-Cut the water line attached to the purifier to the appropriate place after measuring the distance between the purifier and the cold water tap.
|
| TAP |
| LINE |
|
| OUTLET |
|
SIDE OF |
| 90 degree |
PURIFIER |
|
|
PURIFIER WATER | REFERENCE | |
WATER INLET | COUPLER | |
SIDE OF PURIFIER |
|
|