Samsung RSH1NTSW RSH1NTSW1/ZAM, RSH3FTPE1/JUM, RSH3FTPE1/MTR 01TTINGSE UP, setting up _21, Secure the water line, Secure the purifier in position, Attach the purifier lock stations

setting up your side-by-side refrigerator

Remove any residual matter inside the purifier. (Model with the purifier)

01TTINGSE UP

-Open the main water tap to check whether water is running through the water tube on the water inlet side of the purifier.

-If water does not come out through the line, check whether the tap is open.

-Leave the tap open until clean water is running out and any residual matter that built up during manufacturing has been removed.

OUTLET SIDE	PURIFIER
OF PURIFIER
WATER	WATER LINE

Attach the purifier lock stations.

-Hold the purifier lock stations in the appropriate position (under the sink for example) and fix it tightly into place where to screw.

TWO PURIFIER LOCK STATION

TWO PURIFIER LOCK STATION

Secure the purifier in position.-Fix the purifier in position, as shown in the figure on the right.

WATER TUBE
	PURIFIER
PURIFIER	LOCK
	STATIONS
TIGHTENING
BAND

Connect the water line to the refrigerator.-Remove the compressor cover of the refrigerator.-Connect the water line to the valve, as shown in the figure.-When connected, check if there is any leakage. If any, repeat the connection.-Reattach the compressor cover of the refrigerator.

WATER LINE

CONNECTION NUT

INSTRUCTIONS COMPRESSOR COVER OF REFRIGERATOR

Secure the water line.

-Remove the compressor cover of the refrigerator.

-Using clip ”A”, fix the water line to the wall (the back of refrigerator).

-When the water line is secure, make sure whether the water line is not excessively bent, pinched or squashed.

CLIP A

WATER LINE

setting up _21