setting up your
Connecting the water line to the refrigerator
1.Remove the cap from water line on the unit and insert compression nut to the water line on the unit after disassembling from provided water line.
2.Connect both water line from the unit and water line provided kit.
3.Tighten the compression nut onto the compression fitting. Be careful no gap between two items.
4.Turn water on and check for any leakage.
|
| Water Line |
|
| from unit |
| Remove | No gap |
| Loosen a | cap | Water Line |
|
| from Kit |
Only connect the water line to a drinkable water source.
If you have to repair or disassemble the water line, cut off 6.5mm of the plastic tubing to make sure you get a snug,
CAUTION Before being used, the leakage in these places should be examined
• Samsung Warranty does not cover
WATER LINE INSTALLATION.
• It’ll be done at customer’s charge except the retail price includes installation cost.
• Please contact Plumber or Authorized Installer for the installation if needed.
• If Water leakage happened due to improper installation, Please contact installer.
01TTINGSE UP
Installing the water filter.
1.Remove the water filter from the box and put a replacement indicator sticker on the filter as shown.
2.Place a sticker on the filter that dates six months in the future. For example, if you install the water filter in March, put the “SEP” sticker on the filter to remind you to replace in September. That way you’ll know when it is time to replace the filter. Normally filter life is about 6 months.
3.Next, remove the fixed cap by turning it counter clockwise. Keep the cap in a safe place for use if you choose not to use a filter.
1 
2
3
Sticker
(Month indication)